Ships same day on weekday orders by 2 PM PacificFree US shipping over $50Every rig comes with a free bangerAdults 21+

BucketBevel
Your rig not set Bag 0
Menu

Bench notes

Terp slurper sets: the parts, and which ones have to match

Updated

A terp slurper is a banger built in layers: a dish with a slit in its base, a tube rising from it, and a marble on top, with a pillar or pearls inside. Those parts have to seal against each other, and every slurper here comes as a set.

A terp slurper banger, side viewLine drawing of a terp slurper banger. A wide dish at the bottom has a slit in its base. A tube rises from the dish, a pillar stands inside the tube, and a marble sits on top of the tube. The neck runs from the side of the dish to a ground male joint pointing down. dish width top marble tube pillar inside slit base joint
A slurper's parts. The marble and pillar are sized to the banger they come with.

What comes in each set

Terp slurper bangers and sets in stock, with what each comes with. Updated November 9, 2026.
BangerJointsComes withPrice
240mm Competition Banger10 mm male 90°, 14 mm male 90°Banger, Pillar, Marble$57.99
Color Ribbon Slurper Carb Cap & Pillar Banger Set w/ Opal - 14mm Male 90°14 mm male 90°Slurper banger, Color ribbon carb cap with an opal marble top, Ribbon pillar$69.99
3" Tower Slurper Set w/ Etch Pillar & Dichro Marble - 14mm Male 90°14 mm male 90°Tower slurper banger, Etched pillar, 12 mm dichro top marble$39.99
Monark Full Weld Terp Slurper Banger Set10 mm male 45°, 14 mm male 90°Banger, Marble cap, Terp pillar$34.99
Monark Full Weld Terp Slurper Banger Set (14mm Male 90°, Cactus)14 mm male 90°Banger, Slurper marble and pillar set$54.99
Tower Slurper Banger10 mm male 45°, 14 mm male 45°Banger, Etched hollow pillar, Cap$28.99

Each set's joints are the ones its listing offers, and the table gives them all. The Monark Full Weld Terp Slurper Banger Set ($34.99) has the widest choice: 10 mm male at 45° or 90°, or 14 mm male 90°.

Full weld

On these listings, "full weld" means the joint is welded to the body as a single piece of quartz, so there's no seam where they meet. Both Monark sets and the color ribbon set here are full weld, and so is the 3 in tower slurper set.

Which parts have to match

The marble and the pillar. Smoke Cartel's guide says a slurper "requires specific marbles to seal properly". Pillars vary too. The Mini Nail lists its own slurper's parts in millimetres: a 30 mm tall tube with a 9 mm inside diameter, a cap 15 mm across inside and 20 mm outside, and a 30 mm pillar. Those are one set's numbers, and they differ from model to model.

Keep a set's parts together. A replacement marble or pillar should match the one that came in the box: its diameter for a marble, its length and width for a pillar.

Loose parts

These are sold on their own, with whatever size each listing gives. The whistle cut pillar's listing says it's for terp slurper bangers.

Pillars, marbles and pearls sold on their own, with the size each listing gives. Updated November 9, 2026.
PartKindSizeMaterialPrice
35mm Whistle Cut Pillarpillar35 mmQuartz$9.49
Mateo Gonzalez Glass Q Tip Pillarpillarnot statedGlass$27.99
25mm Dart Board Marblemarble25 mmGlass$9.99
14mm Galaxy Planet Marblemarble14 mmGlass$12.99
Stone Cube Terp Pearlpearlabout 6 x 6 x 6 mm (cube)not stated$2.16
Stone Terp Pearlspearl3 mm (pack of 5) or 6 mm (pack of 2)not statedFrom $2.99
6mm Stone Terp Pillpearl6 mmnot stated$4.63
Black Terp Pillpearlnot statednot stated$9.99

Tower slurpers

The 3" Tower Slurper Set w/ Etch Pillar & Dichro Marble - 14mm Male 90° ($39.99) is the one slurper here whose listing gives a bucket width: a 25 mm bevel bucket. It comes with an etched pillar and a 12 mm dichro top marble. The control tower guide covers towers in more detail.

Finding one for your rig

Every set above lists its joint. The Fit Index sorts all the bangers here by joint, slurpers included, and the banger types guide shows how slurpers compare with the other styles.

Questions people ask

What is a terp slurper?

A quartz banger built in layers: a dish with a slit in its base, a tube rising from the dish, and a marble that sits on top of the tube, with a pillar or pearls inside. Its parts have to seal against each other, and it's usually sold as a set.

Can I use a different pillar in my slurper?

Only one sized for that slurper. Pillar lengths differ between models: on r/Dabs, a buyer who received an XL slurper with a 30 mm pillar noted that the maker suggests 35 mm pillars for its XLs.

Sources

  1. Smoke Cartel, Guide to dab banger types a slurper's dish, tube and top; it needs specific marbles to seal
  2. The Mini Nail, Terp Slurper measured part sizes of one slurper set
  3. r/Dabs, Need help with slurper (read on a mirror) 30 mm and 35 mm pillars for regular and XL slurpers